GS160 work perfect on one computer with optimum performance !!!

[Neno]

GS160 works perfect on one computer with optimum performance !!!

- loaded sounds 85%
- 1 reverb
- 1 delay
- 160 poly
- 64 ch
- perfect timing
- 24 audio channels +FX +LM4 +...
---------------------

HOW? www.inet.hr/~nsiskov (\"http://www.inet.hr/~nsiskov\")

Regards
Neno

[This message has been edited by Neno (edited 10-27-2000).]

[Doc]

Please share more about your utility, I use gigastudio with cakewalk, like a few others around here. Will your utility help us? What about running under Windows 95/98?, thanks in advance for sharing.

[Neno]

Program work on Win98 and Win98ME with GigaStudio 160/96 and GigaSampler (any version).

- sequencer not problem
- program is not resident
- don\'t need installation/deinstallation
- programing in C++
- does not contain virus or any negative affect for your PC (YOU HAVE MY GUARANTEE FOR THIS)
My address:
Nenad Siskov
Licka 7/8
21000 Split
CROATIA
tel. 385-21-342-092
nenad.siskov@inet.hr

- If you run GS on other computer than you don\'t need this program.

- I\'m not from NemeSys

May be in future version of GS ( I HOPE ) you will not need my program.

In hopes that gsfix will help you
Neno


[This message has been edited by Neno (edited 10-24-2000).]

[ursatz]

What do you mean by \"not resident\"? Does it tweak the GS executable or the endless wave driver somehow?

[Neno]

WHEN GSFIX HELP:

- when run GS and sequencer in the same computer
- when you have trouble with timing in sequencer (tempo not precise, audio stop playing)
- when you have small polyphony

- when you have PC with mininmum Requirements for GS
CPU PIII or ATHLON>=500,600, HD (ATA 66,100), memory >=256 etc.
- when you have one sound card for GS (GSIF) and other for sequencer or
ONE MULTICLIENT CARD (GSIF,ASIO) --> http://www.nemesysmusic.com/support/hardware.html (\"http://www.nemesysmusic.com/support/hardware.html\")
- IMPORTANT - WHEN YOUR HARDWARE AND SOFTWARE WORKS FINE (WINDOWS, DRIVERS etc)

IN THIS CASE, GSFIX DECIDELY HELP.

Regards
Neno

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by ursatz:
What do you mean by \"not resident\"? Does it tweak the GS executable or the endless wave driver somehow?

<HR></BLOCKQUOTE>
1) Execute and finish (not in memory, not use cpu, not change program or driver code etc.)
2) Military secret, sory
May be in future version of GS ( I HOPE) you will not need my program.

Neno

[LHong]

Some source of latency timer or optimization?

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by LHong:
Some source of latency timer or optimization?<HR></BLOCKQUOTE>

Sory, but latency is hardware or software (driver) problem. If you have high latency
gsfix not help.

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by LHong:
Some source of latency timer or optimization?<HR></BLOCKQUOTE>

Sory, but latency is hardware or software (driver) problem. If you have high latency
gsfix not help.

[Chadwick]

Hi Neno,

I must say that I greatly appreciate your generousity in sending me a copy of your GSFIX utility.

However, I\'ve so far spent an embarrasing amount of money and time getting the PC/GSt/Logic setup to the (slightly underwhelming)point it\'s now at, and I\'m paranoid that your executable may do something other than optimise Gigastudio\'s environment - (maybe open a portal to the Underworld right here in my studio!)

When I told the guys who set up and sold me the system that I was considering using this mystery executable the response was \"NOOOOOooooooo!\" (I have a feeling that they don\'t want to pick up the pieces if I need to reinstall everything.)

What you offer is almost too fabulous to be true.

How can I feel safe to run it?

It\'s a very frustrating position to be in - a single click away from Nirvana or Chaos!

Maybe other Gigastudio users have had the balls to apply your fix?

Thanks again for your generosity in sharing what is obviously the result of a lot of hard work.

Regards
Rick

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by Chadwick:
Hi Neno,

I must say that I greatly appreciate your generousity in sending me a copy of your GSFIX utility.

However, I\'ve so far spent an embarrasing amount of money and time getting the PC/GSt/Logic setup to the (slightly underwhelming)point it\'s now at, and I\'m paranoid that your executable may do something other than optimise Gigastudio\'s environment - (maybe open a portal to the Underworld right here in my studio!)

When I told the guys who set up and sold me the system that I was considering using this mystery executable the response was \"NOOOOOooooooo!\" (I have a feeling that they don\'t want to pick up the pieces if I need to reinstall everything.)

What you offer is almost too fabulous to be true.

How can I feel safe to run it?

It\'s a very frustrating position to be in - a single click away from Nirvana or Chaos!

Maybe other Gigastudio users have had the balls to apply your fix?

Thanks again for your generosity in sharing what is obviously the result of a lot of hard work.

Regards
Rick

<HR></BLOCKQUOTE>
I hope that you read everything about minimum requirements for GS.
Well,
You have my name,address,telephone,E-mail.
I\'m registered member of NemeSys as well as you.
I HAVE TO BE STUPID TO GIVE YOU ANY VIRUS OR ANY NEGATIVE AFFECT FOR YOUR PC.

You can safely run GSFIX.

WHEN GSFIX HELP:
- when run GS and sequencer in the same computer
- when you have trouble with timing in sequencer (tempo not precise, audio stop playing)
- when you have small polyphony

- when you have PC with mininmum Requirements for GS
CPU PIII or ATHLON>=500,600, HD (ATA 66,100), memory >=256 etc.
- when you have one sound card for GS (GSIF) and other for sequencer or
ONE MULTICLIENT CARD (GSIF,ASIO) --> http://www.nemesysmusic.com/support/hardware.html (\"http://www.nemesysmusic.com/support/hardware.html\")
- IMPORTANT - WHEN YOUR HARDWARE AND SOFTWARE WORKS FINE (WINDOWS, DRIVERS etc)

IN THIS CASE, GSFIX DECIDELY HELPS.

Belive me you are just a single click away from Nirvana (or nothing - if GSFIX doesn\'t help in your case)

Regards
Neno

[Simon Ravn]

I\'m sorry to say this, but until proven otherwise, I think you\'re a load of bull http://www.northernsounds.com/ubb/NonCGI/images/icons/smile.gif It doesn\'t run resident, it doesn\'t change drivers or program code. I can\'t see how this would do any difference to anything. Either you\'re spreading a virus or you\'re spreading a piece of code that does nothing..

Simon

[elle]

Neno,

Why not taking this matter up with Nemesys themselves?

[Chadwick]

Maybe it\'s a clever bit of software which optimises windows settings?

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by Simon Ravn:
I\'m sorry to say this, but until proven otherwise, I think you\'re a load of bull http://www.northernsounds.com/ubb/NonCGI/images/icons/smile.gif It doesn\'t run resident, it doesn\'t change drivers or program code. I can\'t see how this would do any difference to anything. Either you\'re spreading a virus or you\'re spreading a piece of code that does nothing..

Simon<HR></BLOCKQUOTE>
Good morning Columbo,
YES, I\'M PARANOIC HATER USERS OF GS.

What\'s your problem?
I don\'t know that I send GSFIX to you!!!
Have you tried my program?
What\'s happend?

Regards
Neno

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by elle:
Neno,

Why not taking this matter up with Nemesys themselves? <HR></BLOCKQUOTE>
I\'m not on NemeSys pay roll.

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by Chadwick:
Maybe it\'s a clever bit of software which optimises windows settings?<HR></BLOCKQUOTE>

Chadwick, you are near the key.

Program code REBUS:
< GS = > poly, channels, timing

[Thomas Regin]

I\'ll take a copy of your program AND run it too, Neno!!

Please send it to: info@gigoff.com

Thanks,

Thomas Regin (\"http://www.gigoff.com\")

[Thomas Regin]

OUTSTANDING!!!!!!!!!!!!!!!!!!!!!!

This is really fantastic!!!.. I just installed Neno\'s small utility and guess what?.. I just tested one of my songs that I wasn\'t capable of playing back because of the amount of instruments and their size. And it plays back PERFECT now. Incredible!! I used to have a lot of problems with clicks and noise using the GigaPiano. That\'s gone as well now!!..

Thanks for a great Utility, Neno! You\'ve really made my day!

PS: No viruses detected so far! http://www.northernsounds.com/ubb/NonCGI/images/icons/wink.gif

Thomas Regin (\"http://www.gigoff.com\")

[ursatz]

Ok, I\'m game - please send a copy to wkcl@pacbell.net.

(That is, if you don\'t mind if I do a little reverse engineering before I run it.... ;-)

[SteveHanlon]

Hi Neno,

Thanks for the info. I will gladly accept this GSfix. Can you please send it to s2871@hotmail.com

How do I run the fix? Is it easy to do?

Thanks again for your effort in fixing bugs.

Marty

[**DONOTDELETE**]

Cuo sam se danas s par ljudi koji koriste tvoj fix. Ludnica, brale. Svaka cast.
Nek se cuje i nas glas. Zajebi Simona.
A kad bude trazio tvoj fix neka plati.

Bravo, maestro.

Outstanding!!!!!
Viva

[Danny Lux]

Will your utility help a stand alone system at all , i.e. polyphony, etc... or does it only helps systems with GS and a sequencer on the same computer?

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by Danny Lux:
Will your utility help a stand alone system at all , i.e. polyphony, etc... or does it only helps systems with GS and a sequencer on the same computer?<HR></BLOCKQUOTE>

Only helps systems with GS and a sequencer
on the same computer.
Neno

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by luka2807:
Cuo sam se danas s par ljudi koji koriste tvoj fix. Ludnica, brale. Svaka cast.
Nek se cuje i nas glas. Zajebi Simona.
A kad bude trazio tvoj fix neka plati.

Bravo, maestro.

Outstanding!!!!!
Viva

<HR></BLOCKQUOTE>

Hvala na podrsci!
Neno

[**DONOTDELETE**]

Want that wonderthing, too...

Please send to: oszillator@gmx.net

tia

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by Thomas Regin:
OUTSTANDING!!!!!!!!!!!!!!!!!!!!!!

This is really fantastic!!!.. I just installed Neno\'s small utility and guess what?.. I just tested one of my songs that I wasn\'t capable of playing back because of the amount of instruments and their size. And it plays back PERFECT now. Incredible!! I used to have a lot of problems with clicks and noise using the GigaPiano. That\'s gone as well now!!..

Thanks for a great Utility, Neno! You\'ve really made my day!

PS: No viruses detected so far! http://www.northernsounds.com/ubb/NonCGI/images/icons/wink.gif

Thomas Regin (\"http://www.gigoff.com\")<HR></BLOCKQUOTE>

I\'m very happy.

[algae]

please send to me as well.
Thanx
alangae@sympatico.ca

[**DONOTDELETE**]

dear Neno, ok, i\'m game, send me the fix too. Very much appreciated, how can i repay you? By the way, how are things at your end of the world these days? i hope you are safe and happy. take care, mark stace@eee.org

[apessino]

I would love to get the program as well. Maye you should upload it somewhere so people stop bothering you.. http://www.northernsounds.com/ubb/NonCGI/images/icons/wink.gif

How about a free copy of Diablo 2 as payment? (assuming it works, of course.. http://www.northernsounds.com/ubb/NonCGI/images/icons/wink.gif )

Thank you in advance..

A-

---------
Andrea G. Pessino (not female, just Italian)
Blizzard Entertainment

apessino@blizzard.com

[**DONOTDELETE**]

could you send me as well?Does it work on pentium 2,300MHZ?Thank you ,aboy

[ursatz]

Yes, it helps in my case too - thanks!

I figured out what it does - no disassembly required! But don\'t worry, I won\'t give away your secret (though it\'s not that hard to figure out). What\'s a little hard to figure out is *why* it improves polyphony; I\'ll have to think about that one. I do notice some timing problems at higher polyphony; but then, I only see this when the number of voices goes well above what I could get before. And I don\'t think I\'ve noticed timing problems at the polyphony levels I was getting before. Interesting. I\'d be interested to know what the Nemesys programmers think about this.

[Haydn]

Please send me a copy of your nifty utility. My email is \"haydn12@home.com\".

I noticed in your post you have the same ASUS CUSL2 motherboard that I\'m using. I have used ASUS boards for a while now without problems. I work at Intel with a few of the developers of the 815e chipset used on CUSL2 board. They warned me to use high quality CAS2 PC133 memory as the timings are quite tight and warned me not to use generic memory for PC133 memory. PC100 generic memory works fine at PC100 memory speed. Thanks.

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by ursatz:
Yes, it helps in my case too - thanks!

I figured out what it does - no disassembly required! But don\'t worry, I won\'t give away your secret (though it\'s not that hard to figure out). What\'s a little hard to figure out is *why* it improves polyphony; I\'ll have to think about that one. I do notice some timing problems at higher polyphony; but then, I only see this when the number of voices goes well above what I could get before. And I don\'t think I\'ve noticed timing problems at the polyphony levels I was getting before. Interesting. I\'d be interested to know what the Nemesys programmers think about this.

<HR></BLOCKQUOTE>
Program code REBUS:
< GS = > poly, channels, timing
Very simply code.

Please, put your configuration info on forum.
thanks
Neno

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by aboy:
could you send me as well?Does it work on pentium 2,300MHZ?Thank you ,aboy<HR></BLOCKQUOTE>

- Please, give me your E-mail.
- Try
Neno
P.S:
May be works on Texas Instruments calculator (joke).

[This message has been edited by Neno (edited 10-26-2000).]

[ursatz]

Neno,

My setup:

K6-2 500 mhz, 30g maxtor diamondmax hd for gigs, 20g WD hd for programs, Epox mvp3g5 mobo, 384 megs ram (PC100), sblive.

[**DONOTDELETE**]

Ursatz,

I think you have underpowered pc for gs and vst working alltogether. With faster pc I supose you would achive higher and maybe full poly. I sugest PIII or Athlon 700+ and asus boards.
However, I would like everyone who submit to this thread also to write what pc configuration he/she has.

thanks

[Chadwick]

My setup is:

Gigastudio
Logic Platinum 4.5
PIII800e, Asus CUBX mobo,
256mb ram,
1 x IBM 15gb UDMA drive for programs,
1 x IBM 30gb UDMA drive for audio,
Creamware Pulsar 2 audio card,
eMagic Unitor II midi inteface (serial), Matrox DH video card,
Intellimouse (serial).
1x15gb & 1x30gb backup HDs,
CD rom,
CDR/W burner.

Because I kept getting ASIO errors (even when only running midi and Giga) I\'ve disabled the audio part of Logic.

Currently, before noticeable latency or slowing the PC to a crawl, I can only achieve between 50 and 120 polyphony - depending on the sample set used. I have a hunch that humongous sounds like Gigapiano etc., load the PC more than your average 8mg Akai sound, resulting in latency problems being noticed sooner.

If Neno\'s fix helps me to run a few tracks of audio and/or those fantastic VST plugins like the B4 or Prophet 52 I\'ll be a VERY happy chappy!


[This message has been edited by Chadwick (edited 10-26-2000).]

[**DONOTDELETE**]

good point

imagine this
gst
vst32
pro52
b4
waldorf ppg
mercury
reaktor
waves gold 3

btw, pro52 rulz

[yrjiok]

Neno,

Could you send me your program at yrjiok@ifrance.com ?
Thanks

PS: Will your program affect my other softs? (my PC does not work only for music)

[ronlucas00]

Neno,

Could you please send your utility to ron@ronlucas.com?

Thanks much!

[djuth]

Please send me a copy of this program: djuth@erols.com.

Thanks!

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by yrjiok:
Neno,

Could you send me your program at yrjiok@ifrance.com ?
Thanks

PS: Will your program affect my other softs? (my PC does not work only for music)<HR></BLOCKQUOTE>

1) www.inet.hr/~nsiskov/ (\"http://www.inet.hr/~nsiskov/\")
2) Program not affect your other softs.
Neno


[This message has been edited by Neno (edited 10-28-2000).]

[Neno]

GSFIX now you can download at: http://www.inet.hr/~nsiskov/ (\"http://www.inet.hr/~nsiskov/\")

Regards
Neno

[ursatz]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by luka2807:
Ursatz,

I think you have underpowered pc for gs and vst working alltogether. With faster pc I supose you would achive higher and maybe full poly. I sugest PIII or Athlon 700+ and asus boards.
However, I would like everyone who submit to this thread also to write what pc configuration he/she has.

thanks<HR></BLOCKQUOTE>

Right you are - I\'m painfully aware that my pc could use more horsepower. I\'m waiting till end of year to see what prices do. (BTW I use Cakewalk.) As it is, though, I have a useable setup; I can get around 120 voices if the planets are lined up right. With Neno\'s fix, it got up to 156 voices before it choked. (The piece I\'m working on at the moment would easily use 280 voices if I had them.)

[Magpel]

Neno, is this only for gigastudio users? Any effect for gigasampler 64 or LE users?

Thanks.

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by Magpel:
Neno, is this only for gigastudio users? Any effect for gigasampler 64 or LE users?

Thanks.

<HR></BLOCKQUOTE>
For GigaStudio 96/160 and GigaSampler (all versions)
Neno www.inet.hr/~nsiskov (\"http://www.inet.hr/~nsiskov\")

[Brian Deeley]

Interesting thread this one!!! Can anyone explain what Neno\'s program actually does???

TIA...Brian

[ursatz]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by Brian Deeley:
Interesting thread this one!!! Can anyone explain what Neno\'s program actually does???

TIA...Brian<HR></BLOCKQUOTE>

Yes, it\'s not too hard to figure out, but Neno has said it\'s a \"military secret.\" Neno, is there some reason why you don\'t want to reveal the trick? It\'s very simple...

[**DONOTDELETE**]

Neno,

Will your program help GS LE users?

H

[**DONOTDELETE**]

Neno,

Will your program help GS LE users?

H

[Neno]

GSFIX HELP GigaStudio 96/160,GS LE, GigaSampler, LE,..., all versions.

Neno

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by ursatz:
Yes, it\'s not too hard to figure out, but Neno has said it\'s a \"military secret.\" Neno, is there some reason why you don\'t want to reveal the trick? It\'s very simple...<HR></BLOCKQUOTE>
Military secret.
Thank you for secrecy.
Neno

[food4thought]

Neno,

Do I need to run this patch everytime I start GStudio, or just once and then delete it?

[Neno]

Mr.ALAN HERTZBERG *
********************
Sory, but ...

The original message was received at Fri, 27 Oct 2000 21:19:03 +0200
from dial-st0447.iskon.hr [213.191.136.239]

----- The following addresses had permanent fatal errors -----
<alndln@juno.com>

----- Transcript of session follows -----
... while talking to mx.jersey.juno.com.:
>>> DATA
<<< 550 Service Unavailable
554 <alndln@juno.com>... Service unavailable

The original message was received at Fri, 27 Oct 2000 23:34:31 +0200
from dial-st0158.iskon.hr [213.191.136.58]

----- The following addresses had permanent fatal errors -----
<alndln@juno.com>

----- Transcript of session follows -----
... while talking to mx.jersey.juno.com.:
>>> RCPT To:<alndln@juno.com>
<<< 554 alndln@juno.com Mail quota exceeded
554 <alndln@juno.com>... Service unavailable

-----Original Message-----
From: nsiskov [mailto:nenad.siskov@inet.hr]
Sent: Friday, October 27, 2000 11:35 PM
To: alndln@juno.com
Subject: GSFIX

---------------------------------------------
Alan:
------
Hello Neno: I would very much appreciate the patch you made for
Gigasampler as I am not rich(can\'t afford 2 computers)and don\'t want to wait
until I am an old man when Nemysis decides to use and post your work if in
fact they do.I very much appreciate the work you and others are starting to
do such as the EMU APS cracked drivers for the Soundblaster(even though I
don\'t own that card).I like the spirit of if the company\'s gonna drag their
*** we\'ll do it ourselves.Question: is it possible to write GSIF drivers for
a card that is not compliant if you have limited knowledge in C? Also if
there are any special instructions for installing the patch please include
them.Thanks much, Alan Alndln@juno.com

Neno:
---------
Hi Alan,
1) no
2) www.inet.hr/~nsiskov (\"http://www.inet.hr/~nsiskov\")

Regards
Neno

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by food4thought:
Neno,

Do I need to run this patch everytime I start GStudio, or just once and then delete it?<HR></BLOCKQUOTE>

Everytime.
1. GS
2. SEQUENCER
3. GSFIX

Neno
P.S. Please, would you share your impressions (positive or negative) about GSFIX in GS FORUM (including your hardware and software configuration).

[LHong]

Neno,
How about to un-install the GSFIX program, what need to be done? it\'s not pretty cool question, but I\'d like to know if it\'s possible? any registry or system initialization are related?
Thanks,
LHong




[This message has been edited by LHong (edited 10-27-2000).]

[Bifop]

Hi all !
Long time no see...

Neno, thanx for the gsfix...

I\'ve tested it but it doesn\'t enhance much things in my case.
My setup is :

Nec PII 300mhz + 128 mg ram
1X 4,5 Gb UW Seagate Barraccuda HD for 2 systems and soundfonts
1X4,5 Gb U2W IBM Hd for Cubase VST 5 files
1X 8,5 Gb UW Quantum external Hd for gigs
Yamaha 8424 scsi Externl burner
1 Sb Live (with APS driver)
2 Matrox vdo cards + 2 X 15\" Sony 100sf monitor
Win 98 (without internet explorer...)

I get 60 notes polyphony together with a few cubase tracks (usually a premix of audio tracks) with or without the gsfix.

I know it\'s a weak horse but :


1- It\'s really well configured and tweaked for audio.
2- I constantly switch from in line/ off line. Whenever I need more \"on line\" midi voices, I use some good 2.1 soundfonts converted from my Akai Cd\'s for sounds up to 32 meg.
3- I like to use what I\'ve got for a while to stay productive... It\'s good to work within boundaries sometimes (so you don\'t use 120 tracks just because it\'s possible...) I have been very productive and creative with it those days. :-))
4- Constant system update is an expensive and non productive business... By the time you get the new system w/ new Os + the latest software version working together, there is something twice faster and half cheaper out... which of course you need for the next revision of your favorite GigaSeLogic...:-)
5- The longer you wait, the bigger your joy when you see the number of plug in/Eq/poly you can add with the new machine compared to the (infamous) old one.

This said, there is a time when the screen redraw is so slow, you know you\'ll have to spend some cash to keep on going...

Like Ursatz, I wait for the end of the year to get a super fast Mobo/Ram/Cpu together with a nice Gsif card (I\'m thinking of the Wamirack but it seems a lot users experience \"rice crispies\" with it...).
I\'ll go for at least 1 gigahertz Chip w/512 Mb of ram + and 3 screens.

In the studio I work with, I\'ve installed a dedicated PIII 450Mhz Gigasampler 1.6 machine with a Gina aside a PIII 550Mhz with the Sonorus card and the Audiowerk 8 for Logic Audio (interfaced with 3 Adats). I\'ve urged the manager to buy Gigastudio while it was cheap, but now I won\'t install the upgrade as I can\'t garanty him a reliable Gigastudio operation for this machine...
I still can\'t get why Nemesys doesn\'t implement a \"Cpu fuse\" or a \"maximum Cpu load\" feature in Gigastudio. Total system crash doesn\'t look good (especially when you just finished an hour talk about the advantage of going computer instead of hardware... ;-)

Anyway thanks Neno for your effort. I\'ll try it on my Christmas new toy ;-).

By the way, I\'ve met Dave Govett here in Paris while he was on the Nemesys European Tour. I must say the guy is quite friendly, knowledgeable and a pretty talented orchestral composer.
I\'ve been very impressed by Donnie\'s percussion library as well. One more on the \"to buy\" list.
I\'m weak.

Back to music.

Best regards to all
Bifop

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by LHong:
Neno,
How about to un-install the GSFIX program, what need to be done? it\'s not pretty cool question, but I\'d like to know if it\'s possible? any registry or system initialization are related?
Thanks,
LHong

<HR></BLOCKQUOTE>
Hi,
GSFIX uninstall is very hard operation.
You must delete GSFIX.EXE, and

JOKE,JOKE,JOKE,

only delete GSFIX.EXE.
It\'s all.

Neno

[ricren]

Hi! I\'m very interested in running your program in my new system!
Please if you can send ir to:
ricardo_renaldi@il.com.ar
Tks a lot

Ric

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by ricren:
Hi! I\'m very interested in running your program in my new system!
Please if you can send ir to:
ricardo_renaldi@il.com.ar
Tks a lot

Ric<HR></BLOCKQUOTE>
Download at: www.inet.hr/~nsiskov (\"http://www.inet.hr/~nsiskov\")
Regards
Neno

[food4thought]

Neno,

You asked me to comment on your little fix.

Unfortunately, it did not help in my case. I sometimes get a pop or two at approximately 50 notes polyphony with a current project, but I am quite sure this is because of the current arrangement, and how the current instruments I use are distributed on the HD. In other projects I could reach higher polyphonies with less complex instruments.

I am however very curious what your little fix does in order to improve performance. I can\'t think of anything that is simple and Nemesys haven\'t thought of. If you don\'t want to reveal it, it\'s fine, but I still am curious http://www.northernsounds.com/ubb/NonCGI/images/icons/smile.gif

[Neno]

I think you have underpowered pc for gs and vst working alltogether.
Please write what pc configuration you have.

Regards
Neno

[aspenleaf]

Hello Neno,
I tried your patch, but in my case I didn\'t see an improvement.
PIII 733 EB Coppermine
Asus P3V4x MB, 128 MB PC133 CAS2
Soundblaster Live, Cakewalk Pro Audio 9.03
Gigastudio 160
Thanks for letting me try it, though.
For those of you who are interested, this fix is NOT free. There is a $25 registration fee. But at least you\'ll get to see if it improves your system before you pay.

[Neno]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by aspenleaf:
Hello Neno,
I tried your patch, but in my case I didn\'t see an improvement.
PIII 733 EB Coppermine
Asus P3V4x MB, 128 MB PC133 CAS2
Soundblaster Live, Cakewalk Pro Audio 9.03
Gigastudio 160
Thanks for letting me try it, though.
For those of you who are interested, this fix is NOT free. There is a $25 registration fee. But at least you\'ll get to see if it improves your system before you pay.<HR></BLOCKQUOTE>

Very interesting.
I tested successfuly GSFIX on the same motherboard (P3V4X,933,256MB (133),SbLive,Yamaha DS2416).
You have good configuration but without enough memory.
I don\'t know which disk (ATA33,66?) you use?
SbLive doesn\'t have MULTICLIENT drivers.
You must have another card for audio in sequencer.
In your case,
- disable audio in CakeWalk
- try with more complicated arr (more channels,more poly)

Anyway thank you for your tried.
Neno


[This message has been edited by Neno (edited 10-30-2000).]

[Laurence]

I\'d like this utility as well.

laurencekingston@bigfoot.com

Thanks,

Laurence Kingston

[Neno]

GSFIX !
NEW VERSION !!!
www.inet.hr/~nsiskov (\"http://www.inet.hr/~nsiskov\")

Regards
Neno

[timp410]

I would like a copy of your program too, Neno. tpringle@c3s.redstone.army.mil
Thanks

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by yrjiok:
Neno,

Could you send me your program at yrjiok@ifrance.com ?
Thanks

PS: Will your program affect my other softs? (my PC does not work only for music)<HR></BLOCKQUOTE>

[Neno]

GSFIX !
NEW VERSION !!!
- Option Auto Run GS
- Install / Uninstall (now required)
www.inet.hr/~nsiskov (\"http://www.inet.hr/~nsiskov\")

Regards
Neno