Assigning GS 96 Outputs?

[Ernstinen]

Hi Y\'all,

How do you assign outputs in the 2 Ports of GS 96? I\'m using the analog outs of a WamiRack24.

Thanks in advance,

Ernstinen

[Chadwick]

From Kevin at Nemesys (some time ago)

It is possible to assign discreet audio port settings for individual drum
sounds loaded onto the same MIDI channel. It is
necessary to have a sound card capable of providing the number of output
channels that you wish to use.

To route a drum set out to separate outputs of your sound card, you must edit
the instrument using the Giga instrument Editor.
Whatever outputs the .GIG file is assigned to in the GigaStudio/GigaSampler,
this setting will offset to the next specified
available output(s).

Select as many output ports as you have drum sounds, for example:

1 Kick
2 Snare
3 Hat
4 Hi Tom
5 Mid Tom
6 Floor Tom
7 Overhead Left (cymbals)
8 Overhead Right (cymbals)

Select the region that represents the Kick Drum, for intance, and click on the
Mix/Layer tab. In the “Channel Offset” window leave
this set to zero. For each subsequent region, enter the offset value of 1-7.
The snare offset will need a value of 1 to route its output to channel 2 of the
audio card. The mid tom will need an offset value
of 4 to route its output to channel 5 of the audio card.

Hope this is helpful,

Kevin
Nemesys Tech Support