Giga @ 48k

[Kim]

I am setting up an audio interface that uses lightpipe out of giga, but I need to set the clock rate at 48k. When I tried this with the soundcard I have presently got, the tuning of the instruments went out. How can this be solved?

Thanks
Kim

[Kim]

Don\'t worry, I fixed it!

btw - I have just found out about this giga group and look forward to corresponding with other users.

Thanks
Kim

[Chadwick]

Hi Kim,

Northern Sounds have done a good job with these forums.

They\'re easy to navigate, and are pretty lively.

There are two others you may want to have a look at:
http://groups.yahoo.com/group/NemesysMusic/messages (\"http://groups.yahoo.com/group/NemesysMusic/messages\")
http://www.tascambbs.com/cgi-bin/ubbcgi/forumdisplay.cgi?action=topics&forum=GigaStudio/GigaSampler&number=16&DaysPrune= (\"http://www.tascambbs.com/cgi-bin/ubbcgi/forumdisplay.cgi?action=topics&forum=GigaStudio/GigaSampler&number=16&DaysPrune=\")

[verrengiamusic]

<BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by Kim:
Don\'t worry, I fixed it!

btw - I have just found out about this giga group and look forward to corresponding with other users.

Thanks
Kim<HR></BLOCKQUOTE>
Hi I have the same problem How did you fix it?
Gianluca www.mp3.com/gianluca_verrengia (\"http://www.mp3.com/gianluca_verrengia\")

[Kim]

All I had to do was set the audio card to 48k aswell. So you have to set giga to 48k as well as the audio card setting. For example, I am using the Gigastaion card, and in the samplerate menu I had to set it to 48k and then giga worked fine.