VSL trouble with GS3 - help needed here.

[Not Dudley Simpson]

.................

[Tomke]

You are probably not doing anything wrong. :)

What you are describing sounds like your CPU get more pressure than it can handle. My first guess would be that your soundcard's buffersize is too small - meaning your CPU gets to work too hard. Open the control panel to your soundcard and set a buffersize of about 256 and try again, and if that doesn't work, increase the buffersize a retry. If my guess is the heart of the problem, then increasing the buffersize will make the stutterings go away to a high degree. However you should not need to set a larger buffer size than 1024. If this problem still exists with 1024 or more in buffersize, then my guess is not the heart of the problem you're experiencing.

Good luck :)

[Guga Bernardo]

Like this:

VSL Performance Tool:
Midi In => Your midi device
Midi out => Midi loopback output port 1

Then open Cubase, select a MIDI track and configure it like this:

MIDI track:
Midi In => Midi loopback output port 1
Midi out => Your virtual sampler input

Each of the 16 numbers inside performance tools corresponds to a channel in wich your final sampler will be receiving information.

Obs: The midi loopback can be anyone one that provides an aditional virtual midi port. The virtual sampler can be anyone, since you respect the configuration above.