RME Digi9652 (slightly OT)

[Simon Ravn]

I have wanted to change my Gina20 for Gigastudio to something else and digital for some time. But I still want to be able to use my outboard gear - and some of it has SPDIF in, so I was wondering if it is possible to route the same signal to an ADAT output and an SPDIF output on the Digi9652 at the same time? That way I could send the SPDIF into my TC M-ONE and the ADAT directly for recording in my Pulsar on the other machine - is this possible?

[Simon Ravn]

Bump... no Hammerfall guys know???

[donnie]

Simon,

I have the Digi9652 combined with the ADI 8 DS. It\'s a killer sounding unit! The GSIF drivers are a little flakey right now though. I\'m sure though that they will get them irnoned out soon.

Donnie

[Simon Ravn]

OK donnie, but do you know the answer of my question? Can I send the same signal out both to ADAT and SPDIF? At the same time.

[ursatz]

(Sorry to intrude on this thread, Simon!)

Donnie, what\'s flakey in the GSIF drivers? I\'m thinking of getting this card myself.

[donnie]

Oh sorry....I forgot....yes you can

Ursatz,

I have been getting clicks every once in awhile. It doesn\'t seem to be releated to latency either. I spoke with the guys at Soundchaser about this and they said that RME should be working on a new driver.

Donnie

[Kenn159]

Donnie
I thought you mentioned when you bought your new machine that it is pop and click free[or are you talking about your older machine].
Im not trying to give you a hard time but Im in the process of putting together a simular machine to yours[1.4 athlon /asus A7V board] because of the success that you have had with it and I was looking foward to no pops and clicks .
Also Donnie are you using name brand or generic ram and is it ECC or non ECC.
Thanks , Ken

[donnie]

Kenn,

No problem at all....actually yes it is on the new machine. I didn\'t have the problem right at first, or at least I didn\'t notice it as much but it has crept in recently. I contacted Soundchaser and they confirmed it was the driver. Other than that it\'s a killer sounding card.

Donnie

[Partyhard]

Hi Donnie

Have you ever tried to capture to file while using your RME driver? I have the exact same card and GSt produces empty files, but only while using the RME driver - other GSIF drivers allow normal WAV files.

Can you try this? I will owe you BIG time...