LCD Flat panel and KVM switches?

[DevonB]

Anyone using a flatpanel LCD display with a KVM switch? What\'s your experience? Which monitor, which KVM and what resolution/refresh are you at? I\'m about ready to buy 2 17\" NEC/Mitsu flat panels to reduce the heat in the studio siginificantly from the 15\" roasting/heating element monitors I currently have, but I want to make SURE before I lay down over $800 first.

Mainly I\'m concerned I\'m going to get hardcore ghosting, or problems going through my 4 port Linksys KVM switch, and want to make sure there isn\'t going to be a problem before I order.

Thanks,

Devon

[csduke]

Originally posted by DevonB:
which KVM <font size=\"2\" face=\"Verdana, Arial\">IoGear GCS84B MiniView SE 4 port Desktop PS/2. Works as advertised.

[Haydn]

I\'m also using an IOGear KVM switch. The image is crystal clear with the 17\" Samsung LCD display I\'m using. No ghosting at all. BTW, I had all sorts of screen distortion with 2 other regular CRT monitors that I was using before with the same setup.