jbibbo
07-24-2000, 09:38 AM
NemeSys would like to make available the v2.01 patch to the Giga community. This patch is NOT officially released, and we will be updating it in the next couple of days. An official notice will be sent out when it is released. However, if you would like to try this beta version of the patch, please go to the following link:
www.nemesysmusic.com/products/versions.html (\"http://www.nemesysmusic.com/products/versions.html\")
A couple of things to remember:
1. You must be registered for 24 hours to get this or any other patch update.
2. If you have a problem and speak to anyone on technical support, please tell them that you are using the v2.01 patch update.
3. Please remember to get the official patch update when it is released.
Here is the current list of the improvements made in this patch. This most recent list can be found in the release notes.
1. The following graphics card caused the application to either GPF or
become unstable:
STB 4400
Diamond viper 550
Intel i740
NOTE: There may be other cards with the same problems. These are the only
ones we have identified.
2. The Editor bugs have been fixed:
a. Not all Sound font files were properly converted.
b. A VC++ Runtime error would occur whenever the editor was up
and the user tried to edit a new instrument from within GSt.
c. The editor would always use Port 1 channel 1 for editing.
d. Dragging a file on the opened editor would not work.
e. Envelop drawing in the velocity split windows show incorrect Decay 1.
f. Editing sub-instruments from a .gig file while loaded in the Studio
has been fixed.
g. Dragging samples from one folder to another folder in the \'wave\' windows
has been fixed.
h. SF2 files with more than 128 instruments are now handled.
3. 24-bit capture to disk would crash the system in msg32.exe
4. Midi Control data was not properly getting restored from a perfomance.
5. Audio was breaking up at low polyphony on the following
audio hardware:
Mixtreme SoundScape.
EgoSys WamiRack/2496
MidiMan Delta 1010
NOTE: This may not be a complete list of audio hardware which was suffering
from this issue.
6. GigaStudio only recognized one of the system\'s CDROMs.
7. Certain midi controllers were causing the sustain pedal to be lost on
channels 2-16.
8. Instrument with Bank 1 and the \'Drum\' switch on would show up as a
extremely large bank number in the application, and you could not
load the instrument onto multiple channels.
9. Instruments with Banks other than 0 would not be properly saved/restored
in a performance.
10. \'GPC 3\' and \'GPC 4\' was improperly labeled on controller surface.
11. Emagic\'s Logic sequencer would not properly working with the GigaStudio.
12. A memory leak was occurring with v2.0 gig files. Eventually, the sampler
would indicate that some non-zero memory usage was occurring eventhough
there were no instruments loaded.
13. SConverter displayed garbage for volume names when a second Akai disk
was inserted (Symphony of Voices problem).
14. SConverter may cause GStudio to crash when LiquidGrooves Disque A is converted.
15. SConverter crashes when converting a volume with no programs(Skippy\'s Big Bad Beats).
16. SConverter generates 0Hz Waves with Miroslav Vitous Acoustic Piano.
17. Dither and Master Attenuation settings were not preserved between Windows sessions.
18. The Conversion from 1.0 to 2.0 now has a progress meter. Also the display
properly updates after the conversion. There was bug which left the version
displayed on the screen incorrect.
Joe (NemeSys)
www.nemesysmusic.com/products/versions.html (\"http://www.nemesysmusic.com/products/versions.html\")
A couple of things to remember:
1. You must be registered for 24 hours to get this or any other patch update.
2. If you have a problem and speak to anyone on technical support, please tell them that you are using the v2.01 patch update.
3. Please remember to get the official patch update when it is released.
Here is the current list of the improvements made in this patch. This most recent list can be found in the release notes.
1. The following graphics card caused the application to either GPF or
become unstable:
STB 4400
Diamond viper 550
Intel i740
NOTE: There may be other cards with the same problems. These are the only
ones we have identified.
2. The Editor bugs have been fixed:
a. Not all Sound font files were properly converted.
b. A VC++ Runtime error would occur whenever the editor was up
and the user tried to edit a new instrument from within GSt.
c. The editor would always use Port 1 channel 1 for editing.
d. Dragging a file on the opened editor would not work.
e. Envelop drawing in the velocity split windows show incorrect Decay 1.
f. Editing sub-instruments from a .gig file while loaded in the Studio
has been fixed.
g. Dragging samples from one folder to another folder in the \'wave\' windows
has been fixed.
h. SF2 files with more than 128 instruments are now handled.
3. 24-bit capture to disk would crash the system in msg32.exe
4. Midi Control data was not properly getting restored from a perfomance.
5. Audio was breaking up at low polyphony on the following
audio hardware:
Mixtreme SoundScape.
EgoSys WamiRack/2496
MidiMan Delta 1010
NOTE: This may not be a complete list of audio hardware which was suffering
from this issue.
6. GigaStudio only recognized one of the system\'s CDROMs.
7. Certain midi controllers were causing the sustain pedal to be lost on
channels 2-16.
8. Instrument with Bank 1 and the \'Drum\' switch on would show up as a
extremely large bank number in the application, and you could not
load the instrument onto multiple channels.
9. Instruments with Banks other than 0 would not be properly saved/restored
in a performance.
10. \'GPC 3\' and \'GPC 4\' was improperly labeled on controller surface.
11. Emagic\'s Logic sequencer would not properly working with the GigaStudio.
12. A memory leak was occurring with v2.0 gig files. Eventually, the sampler
would indicate that some non-zero memory usage was occurring eventhough
there were no instruments loaded.
13. SConverter displayed garbage for volume names when a second Akai disk
was inserted (Symphony of Voices problem).
14. SConverter may cause GStudio to crash when LiquidGrooves Disque A is converted.
15. SConverter crashes when converting a volume with no programs(Skippy\'s Big Bad Beats).
16. SConverter generates 0Hz Waves with Miroslav Vitous Acoustic Piano.
17. Dither and Master Attenuation settings were not preserved between Windows sessions.
18. The Conversion from 1.0 to 2.0 now has a progress meter. Also the display
properly updates after the conversion. There was bug which left the version
displayed on the screen incorrect.
Joe (NemeSys)