• Register
  • Help
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Topic: PMI Gold bundle Sustain problem

Share/Bookmark
  1. #1

    PMI Gold bundle Sustain problem

    Im unable to play the patches with a gradual sustain under GS3
    When i select the sustain control where the patch is loaded and gradually
    slide it, the sustain only activates when it reaches 64, and is in full effect
    once it drops below 64, the sustain cuts abruptly

    the added resonance does work properly though (gradual mic level works)

    is anyone able to get the sustain to work correctly?

    thanks,
    eusav

  2. #2

    Re: PMI Gold bundle Sustain problem

    Also, the sustained C#5 and D5 at highest velocity of the Old lady GS3
    have a very distorted tone to them, anybody else notice it?


    thanks
    esuav

  3. #3

    Re: PMI Gold bundle Sustain problem

    Quote Originally Posted by esuav
    Also, the sustained C#5 and D5 at highest velocity of the Old lady GS3
    have a very distorted tone to them, anybody else notice it?

    thanks
    esuav

    Yes!
    I'm using PMI Old Lady with Halion - the distorted tone at C#5 and D5 is also there.

    WKR
    FDSA

  4. #4

    Re: PMI Gold bundle Sustain problem

    That´s really odd. I just loaded up the Old lady for the first time, and one of the first things I notished was these two distorted notes! (C#,D)..

    There's also the high F5 that on pedal down turns into a f# on max velocity.

  5. #5

    Re: PMI Gold bundle Sustain problem

    Quote Originally Posted by esuav
    Also, the sustained C#5 and D5 at highest velocity of the Old lady GS3
    have a very distorted tone to them, anybody else notice it?


    thanks
    esuav
    Confirmed here in Kontakt version.

    Haven't checked it on the GS3 version yet.

  6. #6

    Re: PMI Gold bundle Sustain problem

    What about the general behaviour of the sustain pedal under gs3?

    Does it only kick in at value=64 or is it gradual?

  7. #7

    Re: PMI Gold bundle Sustain problem

    Same thing here! Also seems that below middle volumes are sporaic, some louder than others.

  8. #8

    Re: PMI Gold bundle Sustain problem

    Oops, Kontakt version. Sorry.

  9. #9

    Re: PMI Gold bundle Sustain problem

    bump..

  10. #10

    Re: PMI Gold bundle Sustain problem

    esuav,

    You must have a controller that does half-pedalling. Unfortunately, as far as I know GS3 only thinks of sustain as "on" or "off".

    I have the exact same complaint. There is a sudden jump between when the pedal's on or off, no partial effect with a partially depressed sustain pedal.

    Anyone: Is it possible to implement such functionality (half pedalling) or, at the very least, to be able change the split level from 64?

Go Back to forum

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •