• Register
  • Help
Results 1 to 8 of 8

Topic: Question for Mal7 or anyone else with GS3 and RME HDSP 9632

Share/Bookmark
  1. #1
    Senior Member
    Join Date
    Mar 2002
    Location
    New York City
    Posts
    246

    Question for Mal7 or anyone else with GS3 and RME HDSP 9632

    Does this card have support for GSIF 2.0? Can you use a mic with this card? I looked on the RME site but couldn't tell. I am having a new system built and was going to use the Tascam 1804 but the drivers for it don't work yet. I thought this card might be a good alternative. Any suggestions? Thanks in advance.

  2. #2

    Re: Question for Mal7 or anyone else with GS3 and RME HDSP 9632

    I have the 9652, and I needed the expansion board for audio. So you might want to make sure

  3. #3

    Re: Question for Mal7 or anyone else with GS3 and RME HDSP 9632

    Quote Originally Posted by TEMPS
    Does this card have support for GSIF 2.0? Can you use a mic with this card? I looked on the RME site but couldn't tell. I am having a new system built and was going to use the Tascam 1804 but the drivers for it don't work yet. I thought this card might be a good alternative. Any suggestions? Thanks in advance.
    Yes. HDSP9632 fully support GS 3.0 and is GSIF2 compliant.

    There are stereo analog input, spdif input, optical adat input and their respective output. Plus an output for a headphone.

    9632 and GS3 have been working flawlessly in my system for months.

    JGS

  4. #4

    Re: Question for Mal7 or anyone else with GS3 and RME HDSP 9632

    Yep, HDSP9632 has support for GSIF 2.0, and has worked flawlessly with GS3 for months....with very low latency.

    I'd highly recommend it

    Mal

  5. #5
    Senior Member
    Join Date
    Mar 2002
    Location
    New York City
    Posts
    246

    Re: Question for Mal7 or anyone else with GS3 and RME HDSP 9632

    Thanks for all the responses. Do any of you guys use a mic with this card?

  6. #6
    Senior Member
    Join Date
    May 2000
    Location
    Ojai, California
    Posts
    305

    Re: Question for Mal7 or anyone else with GS3 and RME HDSP 9632

    Quote Originally Posted by TEMPS
    Thanks for all the responses. Do any of you guys use a mic with this card?

    You'll need a pre-amp for a microphone.

  7. #7
    Senior Member
    Join Date
    Mar 2002
    Location
    New York City
    Posts
    246

    Re: Question for Mal7 or anyone else with GS3 and RME HDSP 9632

    I was going to use an inexpensive pre amp like the Berringer Tube Ultragain Mic100 Preamp. I was just wondering if anyone has used a mic in conjunction with this card? Perhaps played around with the mic and Gigapulse?

  8. #8

    Re: Question for Mal7 or anyone else with GS3 and RME HDSP 9632

    I own a Rode NT1000 & Presonus Tube Pre.

    I seldomly use it now, and mainly with Cubase SX. Never used it through GigaPulse though ...

    Might be worth a try!

    JGS

Go Back to forum

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •