• Register
  • Help
Results 1 to 3 of 3

Topic: yet another cake/GS problem for the patient

Share/Bookmark
  1. #1

    yet another cake/GS problem for the patient

    I have a Yamaha CS1-x keyboard, CW8Pro, Ensoniq AudioPCI Sound Card and GS1.5. As you might guess, the inevitable question is \"How do I run GS from CW?\" (I did read thru all the list btw, and couldn\'t find the answer I needed, although the question has come up from time to time) Is it because all my MIDI channels are mapped to the Yamaha that I can\'t see/reach the EndlessWave driver? If so, can someone please tell me where to find&Assign the Gigasamler driver inside CW?
    Alternatively, I also have the Hubi\'s MIDI Cable program, which does show the Endlesswave driver in its output list when I run it. If nobody can help me from the CW side, can anyone explain how to use the Hubi with this system?

    best regards and urgent wishes for help!
    kavalci

    Note: I did read about the sound card MIDI controller \"multiple client\" issue in a similiar message, but couldn\'t find such a tab in my controoler properties in the device manager.


  2. #2
    Senior Member
    Join Date
    Jul 1999
    Location
    Winsted, CT
    Posts
    1,338

    Re: yet another cake/GS problem for the patient

    You have to load GS first, then open CW with the “Seq” button on the GS screen. The EndlessWave device will then show up as a MIDI port.

    BTW, 1.5 is an older version. The upgrade to 1.6 or 1.61beta are free.

  3. #3
    Senior Member
    Join Date
    Jul 1999
    Location
    Winsted, CT
    Posts
    1,338

    Re: yet another cake/GS problem for the patient

    You have to load GS first, then open CW with the “Seq” button on the GS screen. The EndlessWave device will then show up as a MIDI port.

    BTW, 1.5 is an older version. The upgrade to 1.6 or 1.61beta are free.

Go Back to forum

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •