• Register
  • Help
Results 1 to 8 of 8

Topic: Gigasampler Installation

Share/Bookmark
  1. #1

    Gigasampler Installation

    Help!
    I have been unable to install Gigasampler in my computer. At first I was using an AWE64 on my system (AMDK6 233MHZ, 96 RAM)
    But I have recently purchased a Dakota/Tango24 system and still it won\'t install and boot up!
    I would greatly appreciate any comments, suggestions.
    Thanks
    Fred

  2. #2

    Re: Gigasampler Installation

    What are the symptoms? Does the install not complete? Or does GS not run after installing? Give a step by step account of what you are doing so we can narrow down the problem.

  3. #3

    Re: Gigasampler Installation

    <BLOCKQUOTE><font size=\"1\" face=\"Verdana, Arial\">quote:</font><HR>Originally posted by killerbobjr:
    What are the symptoms? Does the install not complete? Or does GS not run after installing? Give a step by step account of what you are doing so we can narrow down the problem.<HR></BLOCKQUOTE>

    Killerbobjr: Actually GS does install, but it does not boot-up when I try to run it It gives me the following message: \"this program has performed and illegal operation and it will shut down\" and if I open the Details button it has the following;

    GS caused an invalid page fault in
    module EWCTL32.DLL at 0177:1000389e.
    Registers:
    EAX=00000000 CS=0177 EIP=1000389e EFLGS=00010246
    EBX=00000000 SS=017f ESP=0078fd4c EBP=004549cc
    ECX=00000000 DS=017f ESI=008b0b80 FS=0f5f
    EDX=00000059 ES=017f EDI=008b0b94 GS=0000
    Bytes at CS:EIP:
    81 38 b7 92 00 00 74 32 53 68 70 a0 00 10 68 28
    Stack dump:
    00453050 004549c8 00000000 0051357b 0045303c 0078fe38 00680000 004549c8 78036e84 00000000 00000000 0000000d 78009883 00453038 0078fe28 0051c14b

    It will load and boot on my computer at work and it actually has less memory than my computer!
    Hope this helps
    Thanks
    Fred

  4. #4
    Senior Member
    Join Date
    Jul 1999
    Location
    Winsted, CT
    Posts
    1,338

    Re: Gigasampler Installation

    Try searching your system for other copies of EWCTL32.DLL. Make sure that the one with the newest date is in your \\Windows\\System folder.

  5. #5

    Re: Gigasampler Installation

    Hi there

    Just for your Information

    EWCTL32.DLL

    is not a WIN-System DynamicLinkLibrary

    It is the EW (EndlessWave) Driver of your GigaSampler.
    So I think you will not find a newer Version
    than the one with the latest GS-installation.


    Manfred

  6. #6

    Re: Gigasampler Installation

    I agree with Bill. If you have mixed up versions (say between GS LE and GS full) it may be causing problems. Also, I\'ve had problems before with the AWE64 and GS. Remove the AWE64 and all the drivers installed for it, then completely uninstall GS, making sure EWCTL32.DLL no longer resides on your hard drive. Also make sure your Dakota/Tango is not sharing its IRQ with other cards. You may have to move the card to another slot, or turn off Plug\'N\'Play in the BIOS and assign IRQ\'s individually. Reboot your machine after making these changes, then reinstall GS and reboot after the install completes. Hopefully, this will fix things. If not, you\'ll have to call Nemesys tech support and have them help you track this down. :-(


  7. #7

    Re: Gigasampler Installation

    OK I\'m going to purge and cleand the computer\'s files and try the manual IRQ and hope that it does the trick..

    Thanks again

    Fred

  8. #8

    Re: Gigasampler Installation

    First.. I would like to thank all of you that e-mailed with your suggestions.

    Now for the good news! I was able to install and load my Gigasampler!!
    It all had to do with some garbage that somehow got attached to my system.ini file (the garbage was at the very beggining of the file itself).
    After I deleted the stuff I did a re-boot and my Gigasampler worked.
    Thanks again.
    Fred

Go Back to forum

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •